Generic 1.5kw VFD (240v or 3 phase input) Kit
These awesome digital VFDs can be used for constant torque loads ( such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter. The input for this VFD supports either a 240V single phase or 3 phase input.
They support full range speed adjustment from ~100rpm to 24,000rpm and are designed to control 3 phase motors on Lathes, Mills, Car Hoists, Pumps & Conveyors, grinders, the options are endless.
These VFDs support either an external potentiometer for speed control or PWM speed control from a microcontroller. You can also adjust the speed using the + or - buttons on the front of the LCD panel.
The efficient design of these VFDs with built-in heatsink and cooling fan allows the unit to run continuously for hours of use at full load.
- Range: 0.1~400.0Hz
- Accuracy: Digital: 0.1%（-10~40℃）; Analog: 0.1% （25±10℃）
- Setting Resolution: Digital: 0.1Hz; Analog: 1‰ of max. Operating frequency
- Output Resolution: 0.1Hz
- Operator Setting Method: Press directly ←∧∨ to set.
- Analog Setting Method: External Voltage 0-5V，0-10V，4-20mA，0-20mA.
- Other Functions: Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
Ramp Control: Selectable 4-speed steps ramp-up and -down time (0.1-6500s).
Torque Control: Torque increase settable, the starting torque can reach 150% at 1.0Hz.
Multi-Inputs: 6 multi-function input terminals for 8–speed step control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions.
Multi-Outputs:5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings.
Other Functions: Auto Voltage Regulation (AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control、Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
Overload Protection: Electronic relay protection
Fuse Protection: Internal fuse provided
Over-voltage: DC Voltage ＞400V.
Under-voltage: DC Voltage ＜200V.
Restart After Instant Stop: Restart with Frequency Track
Stall Protection: Stall protection in ramp operation
Output Short Circuit: Electrical circuit protection
Other safety features: electronic over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.
Please note: No wiring is supplied with with Unit. If you wish to purchase some spindle cable suitable for this VFD then check out our high quality VFD cable here