Full metal Hotend + BMG Extruder upgrade

Full metal Hotend + BMG Extruder upgrade

$99.00Price

 

Wow are we impressed with the performance of this TriangleLab full metal Hot-end and Extruder upgrade kit. This awesome upgrade setup greatly improves printing performance and speed. 

 

Please refer to documentation below in the "Technical Support / Documentation" section for more info.

 

 

Supported 3D printers

CR-10S
CR-10S -S5
CR-10S -S4
CR-10
CR-10 -MINI
CR-20
CR-20 PRO
Ender2
Ender3
Ender3 PRO
TronXY X5S
Tevo Tornado

 

Parts Included

1 x Mini BMG Extruder
1 x BLUE PTFE TUBE 1M
1 x HeatSink 
1 x Titanium alloy heat break
1 x CR-10 Heater Block                                       
1 x Silicone sock
1 x 0.4MM Nozzle (Brass)
1 x Thermistor (NTC 100K B3950)
1 x Heater Cartridge(12v or 24v)

Voltage
  • Technical Support / Documentation

    Basic Tips

    Recommended slicer setting:

    retraction speed  over 80MM/S

    retraction length 2.5-4MM

     

    If you are facing a PLA clogging problem,please try the followings:

    1. Increase the retraction speed. The speed may have being  limited in the firmware try to change it. G-command "M203 E200"

    2. Increase the extruder  acceleration.  check your firmware settings. G-command "M201 E9000"

    3. Reduce the retraction length. It may vary on your machine setup.

    4. Increase the nozzle temperature by 5-10 degrees.

    5. Do not install the 2 screws for support the heatblcok like the stock hotend on a CR-10 printer.

    6. Make sure that there is no gap between the heatsink and the heat breaker.

    Modifying Marlin firmware to work with the upgrade

    Please see this documentation HERE

     

twitter icon trans bg.png
  • Our facebook
  • Our Instagram
  • Our YouTube channel
  • Pinterest

CNC3D PTY LTD is proudly an Australian owned and operated business | ACN: 649 541 202