All of our TurboCut endmills are sent via Australia post express for speedy replacement
These single flute Upcut endmills have been specifically designed for cutting Aluminium, brass and aluminium composite panels. The large single flute design makes them very efficient at removing swarf and keeping the endmill cool to reduce any chip welding.
These endmills are made from solid Japanese carbide and have no coating at all.
Recommended for
- Aluminium
- Brass
- Plastics (HDPE, ABS)
- Auminium Composite panels
Please Note
It is recomended to test these endmills at various feeds and speeds for the best results. Our team have had great success milling aluminium at ~18K RPM at ~600mm/m with excellent results. This is purely indicative though based on the rigidty of your machine.
It is not recommended to use these endmills for wood as it's upcutting profile will leave a rough top surface edge on your timber.
Please be aware that the 8mm variants of these endmills will not fit in an ER11 collet such as those that are standard with a CNC3D QueenBee or QB2 machine. The maximum size cutting bit that will fit in your ER11 collet is 7mm.
TurboCut 1 Flute Upcut (Aluminium & Brass)
BULK BUY: 10% off for 10 or more*
Endmill Size Total Overall Length 1x4x3.175mm 38mm 1.5x5x3.175mm 40mm 2x6x3.175mm 38mm 2x10x3.175mm 39mm 3.175x8x3.175 38mm 4x12x4mm 45mm 4x22x4mm 46mm 6x22x6mm 48mm 8x25x8mm 60mm ** These are approximate overall lengths. This information should only be used as a guide. We recommend measuring the bit after you receive it for exact measurements **
The 10% bulk discount applies only when you purchase 10 or more of the same type of endmill, in the same transaction.
You can mix sizes within that type, but all 10 must be the same endmill type.
Orders combining different endmill types to make up 10 units do not qualify for the discount.