PLEASE NOTE: Operating voltage of these solenoids  is 19.2-26.4V (not as stated in the image: 20.4-26.4V)

Reliable, High-Speed Air Release for CNC Automatic Tool Changers (ATC)

 
Upgrade or replace your CNC automation components with our heavy-duty 3V1-06 3/2-way direct-acting pneumatic solenoid valve. Upgraded with an efficient 4W coil, this valve delivers the rapid, reliable response time required for demanding CNC Automatic Tool Changer (ATC) air release systems.
 
Whether you are commanding a spindle tool release, driving pneumatic grippers, or managing single-acting cylinders, this valve ensures precise air direction control without relying on pilot pressure.
 
 
Key Features
Built for CNC ATC Systems: Engineered specifically to handle the rapid cycling and instant air release required for smooth automatic tool changes.
Upgraded 4W Coil: Delivers strong magnetic actuation with minimal power consumption, reducing heat build up during extended machine operation.
True Direct-Acting Mechanics: Operates flawlessly from 0 to 116 psi. Because it does not require a minimum internal pressure to shift, it responds instantly every time.
Zero Lubrication Required: Maintenance-free design featuring wear-resistant internal seals that operate flawlessly on dry, filtered air.
Integrated Manual Override: Features a convenient manual button allowing you to test air lines, clear jams, or calibrate tool changes without powering up your electronics.
Modular Manifold Design: Easily gang multiple valves together using standard coupling screws to save valuable enclosure space.

Technical Specifications
Model: 3V1-06 (3V1-6)
Type: 3-Port, 2-Position (3/2-Way), Normally Closed (NC)
Port Size: 1/8" Thread
Coil Power: 4W (High-Efficiency)
Working Medium: 40 Micron Filtered Compressed Air
Operating voltage: 19.2-26.4V 
Operating Pressure Range: 0 ~ 0.8 MPa (0 ~ 116 psi)
Operating Temperature: -5 to 60°C
Response Time: ≤ 0.05 seconds
 

Port & Plumbing Guide
Port P (Inlet): Connect directly to your main regulated compressed air supply.
Port A (Outlet): Connect to your spindle’s pneumatic drawbar or ATC air release cylinder.
Port R (Exhaust): Vents trapped air during tool clamping. (We highly recommend installing a 1/8" brass muffler to quieten exhaust noise and keep workshop dust out of the valve).