Digital Depth gauge Caliper

 
A super affordable and handy digital depth caliper allows you to accurately test the depth of bolt holes, slots and channels in your CNC jobs.
 
Simply place your caliper over the channel and zero the caliper in it's highest position. Then carefully press the top down so the needle goes into the channel until it bottoms out and take your measurement reading.
 
This information can be critical to ensure the tolerance of parts or for fine tuning your CNC Z travel.
 
It can also be used to determine the flatness of material in some cases as it skates over the surface of a sheet of stock.
 
You can choose to measure depths in either millimeters or inches with an easy button press.
 
Please note: This unit uses a single LR44 button cell battery, we do not provide a battery.
 
Specificatons
Measuring Range：0-25.4mm / 0-1"
Material：ABS Plastic / Stainless steel needle
Resolution：0.01mm / 0.0005"
Accuracy：±0.02mm
Color：Black / Silver
Battery：LR44 1.5V（battery not included）
 
Please note: These calipers are designed for professional use ONLY by qualified Tradespeople and not to be used in the presence of children. These calipers are NOT intended for use by the general public. Do not purchase these calipers if you are not using these calipers for commercial use.