Hey everyone! 👋
In this video, we’re diving into the very first steps of setting up your C3DTHC Plasma Torch Height Controller.
We’re starting with the assumption that you’ve already got your C3DTHC wired to your controller and your machine is moving smoothly. From there, we’ll walk you through a full tour of the settings, menus, and a super quick way to get your C3DTHC beautifully calibrated. 👌
You’ll also see exactly how firmware updates work and how to connect it all up with CNC3D Commander so you can get the most out of your setup.
Whether you’re a first-time user or just giving your C3DTHC a fresh tune-up, this guide will have you cutting with confidence in no time. 🔥
📚 Learn more about the C3DTHC here:
🛒 Grab your own C3DTHC here:
https://www.cnc3d.com.au/c3d-thc-plasma-torch-height-controller
💡 Pro Tip:
We highly recommend using a plasma probing assembly with every CNC plasma machine. It helps you achieve perfect cuts with fewer job issues.
Check out our plasma sliding probe assembly design here:
https://www.cnc3d.com.au/cnc-plasma-torch-probing-assembly-w-magnetic-breakaway