Hi guys
I already connected my laser to cnc3d machine.However does not work properly.Laser is very weak so it does not cut properly.
I think I could not connect properly on main board connections.
So how can I connect from the beginning to end for laser connections
Just adding Portuguese to the list here.
The XYZ Probe wizard uses input boxes with numbers that are formatted according to the regional language.
This makes a code like G98 G0 Z-8,5 to crash the program because of the comma.
This could easily be fixed by a "string saniziting" routine to replace commas for dots.
This has been resolved via phone! An important note regarding Commander. It does not support language/number sets that use a comma as a decimal place. Changing the machine to a full stop as a decimal place has resolved the issue. Current known Windows language sets affected to date: French Polish Turkish Lebanese I hope this helps!
Hi hakanipek25,
Can you please reach out to us via Facebook here (https://www.facebook.com/cnc3dau) or give us a call for a quick response. Regards,
Dave
Hi hakanipek25,
Can you please reach out to us via Facebook here (https://www.facebook.com/cnc3dau) or give us a call for a quick response. Regards,
Dave