All of our TurboCut endmills are sent via Australia post express for speedy replacement

These 2 flute ballnose endmills are designed for machining of steels and stainless steels, they are a great solution for mould makers with a long shank for deeper cuts. They are suitable for machining metals with a hardness of HRC55 or less.

These endmills are made from solid carbide and have a HRC55 TiAIN coating.

Recommended for

- Steel/Stainless steel

- Other ferrous metals

These cutters are made in Germany to our specifications.

Please be aware that the 8mm and 12mm variants of these endmills will not fit in an ER11 collet such as those that are standard with a CNC3D QueenBee or QB2 machine. The maximum size cutting bit that will fit in your ER11 collet is 7mm.

TurboCut 2 Flute Ballnose (HRC55)

Name: TurboCut 2 Flute Ballnose (HRC55)
Brand: TurboCut

From $16.00

GST Included

BULK BUY: 10% off for 10 or more*

Radius x Cut Length x Shank Diam

Quantity

Endmill Size (Radius x Cut Length x Shank Diam)	Total Overall Length
R1x4x4mm	50mm
R1.75x7x4mm	50mm
R2x8x4mm	100mm
R3x12x6mm (Long)	100mm
R3x12x6mm (Short)	50mm
R4x16x8mm (Long)	100mm
R4x16x8mm (Short)	60mm
R6x24x12mm	75mm

** These are approximate overall lengths. This information should only be used as a guide. We recommend measuring the bit after you receive it for exact measurements **

No Reviews YetShare your thoughts. Be the first to leave a review.

TurboCut 2 Flute Ballnose (HRC55)

Specifications

Bulk Buy Discount Disclaimer:

Shipping Facts

Returns & Warranty

Payment Terms

Privacy Policy

Terms of use

Contact Us