All of our TurboCut endmills are sent via Australia post express for speedy replacement
These 1 Tooth DLC threadmills are excellent at producing very precise and straight threads in a variety of materials including almost all types of medium-heavy density plastics, aluminium and brass.
From our testing, these 1 tooth DLC threadmills produce spectacular results as they evacuate chips very effectively and and create very clean and smooth thread.
Fusion360 has threadmilling operations built-in that work quite well with these Threadmills.
These threadmills are typically 3 flutes but larger sizes have 4 to compensate for their diameter and required chip ejection.
These threadmills have a HRC60 hardness rating.
Our PRO endmill range are made using high grade tungsten carbide coated a specialized DLC (diamond like coating) designed to out last and out perform conventional uncoated carbide threadmills. The coating is designed to reduce wear and tear and dissipate heat leaving your threads with a crisp clean finish.
These threadmills are rated for full commercial and industrial use on a regular basis.
Recommended for
- Plastics (Medium - Hard)
- Aluminium
- Brass
- Composite materials
Please Note
These endmills work extremely well with plastics and alloys but despite their high hardness rating, they are not recommended for steels or other ferrous metals as the high temps of steel machining can cause the coating to degrade.
A proper thread milling operation needs to be done to use these endmills effectively and a pilot hole must be made first to suit the threadmill of your respective thread pattern.
Please note: The 8mm or larger shank variants of these endmills will not fit a 1.5kW spindle or an ER11 collet, such as those supplied standard with CNC3D QueenBee, Ultimate Bee and QB2 machines. ER11 collets have a maximum shank capacity of 7mm.
TurboCut PRO Threadmills (1 Tooth)
BULK BUY: 10% off for 10 or more*