XYZ Touch probe
These touch probes are the ideal way to set your zero to the absolute edge of your work piece or to do a circle probe function.
These probes feature a 4mm hole for inserting a banana plug to easily connect your probe wires.
Manufactured from Aluminium with a premium conductive anodised coating for accurate contact when probing
For those new to XYZ probing, the primary purpose of these probes is to accurately set your zero position in reference to a corner of the piece of material you are working on. Simply place the probe over the corner of your choosing and position your endmill approximately 10-20mm above the middle of the surface of the probe. Then simply run a macro to set your XYZ zero point.
Using your XYZ probe is easy on a GRBL based CNC machine using our CNC3D Commander software via the probing Wizard.
For a quick start guide, see an instructional video of using your probe with our CNC3D Commander software in the photo reel at the top. For other platforms, see macro examples below:
Included
- XYZ probe
- 1m cable fitted with 1 alligator clip
Please note: The controller side of the cable Kit is bare ended so you can add any type of connector you like to your probe to suit your controller.