top of page

CNC3D Master Suite build 364

12 hours ago
4 min read

Released 16 November 2026. Version 1.1 build 364 of CNC3D Master Suite: 8 new features, 21 bug fixes, a NightHawk firmware update. Download the latest build (free, Windows).

New features

  • Commander: the AI Assistant can now write DaveScript macros, check them and open them in the Macros editor for you to review, save and run yourself.

  • Commander: Claude Desktop can write your macros the same way through Commander's Claude connector, with Commander open.

  • Commander: when your NightHawk can't join your WiFi, Commander now explains why in plain English and tells you exactly what to check.

  • Commander: every function box now starts with Select action..., a searchable list of numbered actions that your macros can also run with action{ n }.

  • Commander: macro editor windows no longer lock Commander, so you can keep several macros open, edit them on the fly and save with Ctrl+S.

  • Commander: choose your job's start point in the G-code Wizard: put X0 Y0 at any corner, edge centre or the middle of the job, or shift it by an exact X, Y or Z offset (Tools > Move / Set Origin).

  • Commander: when a controller on USB never answers, Commander now offers to switch the Controller type between Nighthawk and xPRO V5 for you (Settings > Communication), the usual fix for an xPRO V5 that will not connect.

  • Commander: Claude Desktop now finds CNC3D's tools straight away, builds a whole job in Design Suite and exports the G-code, without freezing while a window waits on you.

Bug fixes

  • Commander and Design Suite: numbers are now read the same on every PC, so Windows set to a comma for decimals no longer garbles text or SVG imports.

  • Commander: Job Sync skips a card file whose name is too long for Windows instead of stopping with an error every time you connect.

  • Commander: the Job Sync window no longer closes itself the first time it runs.

  • Design Suite: a 3D carve with roughing and a finishing Pass Depth no longer spends hours cutting air, because finishing only takes extra passes where material is still left.

  • Commander: restarting a job from a line now shows the time left for the rest of the job instead of the whole job.

  • Design Suite: when you set a cut for several shapes at once, holes drawn as separate shapes are cut as holes, so DXF plates come out true size.

  • Design Suite: SVG files in pixels, inches or other units, inch DXF files and binary DXF files now all import, at their true size.

  • Design Suite: traced logos no longer get grooves cut between their letters, transparent PNGs trace properly and an outline drawn twice (common in DXF files) is cut once.

  • Design Suite: fixed toolpaths that could spoil a part: ramps on open lines, tabs on small holes or next to a ramp, knife leads, leads on a part nested in a hole, small holes cut Inside and the last lead-out when tabs are on.

  • Design Suite: plasma and laser now cut each hole before its outline, plasma pierces inside the hole and its Safe Z now sits above the cut height.

  • Design Suite: Pen/Knife now leaves an open line open instead of cutting straight back to its start.

  • Design Suite: curves are cut as arcs again, V-carve files are a fraction of the size, plates with holes export in seconds and Pockets no longer cut a wall twice.

  • Design Suite: a V-carve Pocket no longer cuts past the edge of the shape where the bit moves from one carved area to the next without lifting.

  • Design Suite: the export now warns you, naming the shape, when parts overlap or sit closer together than the cutter, or a hole is too small for the bit.

  • Design Suite: a laser export with nothing to burn now stops and says why; shapes inside groups no longer burn a border.

  • Design Suite: an import now tells you when text in the file could not be brought in, so you can convert it to paths first.

  • Commander: the DaveScript manual (Help in the macro editor) is brought up to date, including action{ n }, settool{ }, isnumeric{ } and the tool number variables.

  • Commander: saving a recorded macro now opens your recorded moves in the editor instead of an empty script.

  • Commander: an error in a DaveScript macro now stops the macro with its message instead of carrying on or sending the faulty line to your machine.

  • Commander and Design Suite: the X, Y and Z arrows in the 3D view now sit on your job's X0 Y0 Z0 instead of the corner of the job, so you can see where zero is.

  • Commander: Spanish and Italian messages now show accented letters properly instead of codes such as u00e8.

Nighthawk Firmware Update to V3.6

  • WiFi messages from the controller now say in plain English why a connection dropped or couldn't be made, instead of giving a code.

  • The controller can read a card job's stock outline so a CNC3D Navigator can trace the job before you start it.

  • The web interface (V2.0) now refuses file and folder names over 80 characters or with characters the controller can't use.

  • Pressing Stop during a job with a PWM, 0-10 V or BESC spindle can no longer reboot the controller.

  • Using the spindle stop override during a feed hold can no longer restart the controller.

  • Fixed a silent restart, even mid job, that could follow a card upload cut off part way.

  • A firmware update straight after a cut-off update now goes through first time.

  • A G-code value with an absurd number of digits can no longer crash the controller when offsets are read back.

  • A card job that disappears is now reported once instead of flooding the console with errors.

  • Fixed the memory losses behind the silent restarts some 3.5 users saw after heavy SD card, web page or network use.

  • Dropped or half-open network connections can no longer use up the controller's connection slots, so the web page, Commander and the Navigator can always reconnect.

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page