top of page

CNC Bits, Router Bits, Endmills & Collets

A collection of high quality CNC endmills, router bits and collets for every job. Stocked in Australia

To keep things simple you can download our TurboCut endmill tool libraries for your favourite CAM programs.


Feeds and speeds are also built into CNC3D Commander under the "My Tools" menu, or work out your own with EndmillCalc, our science and experience based endmill calculator.

Have no idea what to get? that's ok, Especially for beginners this can be daunting so here is a rough guide.

​

  • Softwood / Hardwood / MDF - A 2F straight cut endmill is more than fine to use and are the more economical option. They leave a decent top and bottom finish also. A compression (up/down cut) bit is a great alternative when you are cutting all the way through and leave an excellent top and bottom finish. Use a down cut when you want a crisp top finish at the expense of a rough bottom finish if the bottom finish does not matter.

​

  • Plywood - The go to for these materials are a compression or down cut bit. A compression bit cuts up through the material for the first 4mm and the rest is a down cut. A down cut does an equally great job by pushing the layers down rather than ripping up. Another great go to for plywood is a straight cut. These do not pull up or down and leave a great finish.

​

  • Cast Acrylic - A 1 flute UP-CUT bit ejects the chips well and minimises any chip welding and are the best cutter possible.

​

​

  • HDPE/ 2 ply colour ABS - For best results a straight flute is recommended for 2 ply plastics like Traffolyte. For HDPE you can also use a 2F straight cut as well as an up cut. The Up cut will produce the best results and minimise any chip welding. Just make sure your material is well secured when using an up cut bit! 

​​

  • 3D profiling - you have a choice of ball nose cutters with a long cutting length or tapered end mil

​

  • Holding it all - ER11, ER16, ER20, ER25 and ER32 collets, ER11 and ER20 collet nuts, shank adaptors for 6mm and 6.35mm trim routers, and a genuine Makita 6mm collet.

​​

**Please note: the 8mm variants of our endmills will not fit an ER11 collet, including the ER11 supplied as standard with a SharpCNC, QueenBee or QB2. The largest bit an ER11 will hold is 7mm. For anything bigger you'll need ER16, ER20, ER25 or ER32 collets **

​

    bottom of page